Avante Prince 9 Watch Winder

• Case with 9 watch winders and jewellery storage

• Digital card-locking system

• Individual programmable controls for each watch winder

• Watch winders stop at 12 o’clock position

• Programmable progressive LED lighting system

• Auto On/Pause winding and lighting function controlled by sensor

• Handcrafted case and watch holders trimmed in genuine cowhide leather

• Exterior trim panels in either classic wood or real carbon fiber with piano grade finishing

• Quiet operation with low magnetic interference watch winder system

Details:

• PRINCE is featured with a digital locking system; each unit comes with 3 cards. This locking system is battery powered (low power consumption – for 4 standard alkaline batteries (AA size, E91), it can give a life span of approximately 1 – 2 years. 

• An external backup battery case is available when users are unable to open the door in case the system is out of battery.

• Individual programmable controls for each watch winder, with choices from 0 TPD to 1300 TPD, and auto mode with different directions. The user-friendly control system can memorise the customer’s settings even when power source has been disconnected.

• The auto winding mode setting is especially designed for most collectors. It simulates realistic wearing patterns. This winding mode runs 1900 TPD in both directions, operates in 18 hours and 6 hours rest, and then repeats the cycle again.

• Each watch winder stops at 12 o’clock position. It has individual infrared sensor for positioning and monitoring.

• Programmable progressive LED lighting system, it allows customer to choose their own setting in 4 different modes.

• Auto On/Pause function for watch winding and lighting system detected by door sensor. The watch winders will stop at 12 o’clock position and LED light will progressively come on when door is opened. Winders will start running and LED light progressively switches off when door is closed.

• Handcrafted case is fully trimmed in genuine cowhide leather, it features a leather panel’s drawer for your jewellery and other valuables, and it is installed with hidden metal slides.

• The watch holders are trimmed in genuine cowhide leather and micro fiber designed to suit different wrist size from women to men. There is a detachable extension for user with larger wrist size (standard watch holder: 14 – 18.5 cm; with extension: 19-23 cm).

• The PRINCE features an elegance handcrafted panels in either classic wood or real carbon fiber with high gloss polished piano lacquer finishing over 10 layers inlay work.

• AC power operates.

• Dimension: 34.5 (W) x 48.0 (H) x 26.5 (D) cm

• Weight: 15kg

In the Box

• PRINCE – watch winder

• Documentation & Folder

• Access Cards – 3 pieces

• Warranty Card ( with unique P/N  number)

• Power Adapter  (100-240v ~50-60Hz,  output 5V -2A)

• External backup battery case

• Micro-fiber cleaning cloth

• Deluxe gift box